2-3 working days for sample, 10 working days for big order
42inch DIY ir multi touch frame for televisions at home
DIY touch TV, support all parts.
Ten-users write finger touch directly for operation; Strong anti-resistance to light, work directly under sunlight;
Intelligent gesture-recognition like zoom in or out the pictures;
Write by fingers
Frame Type – Aluminum
Frame Color- Black
Device driver version- DL-USB
Diagonal Display Area - 42”
Scanning form- Auto
Data Port - USB
Touch points – 2-10 touch points
View Angle - 178/178 (H/V)
Width of frame: 21mm
Service Life - >10 years
Induction Type infrared
Writing Type finger or pen
Positioning Accuracy ≤0.2m
Touch Preciseness 32768×32768
Cursor Speed ≥125dots/second
Transferring Rate 12m/s
Scanning Rate first point 25ms consecutive points 8ms
Consumption Current <1W, USB 5V voltage, current ≤ 100mA
Operating Voltage DC 4.6V ~ DC 5V
Working Environment 1.Operating Temperature:-10 °C- 45 °C
2.Operating Humidity:20% - 85%
3.Altitude:3,000m or below
4.Under daylight, indoor & outdoor environment
Touch Spot Life Span Over 60,000,000 times single spot touch
Operating Instructions & Quick Start Guide
2 x felt Pen
6M USB cable
The interactive touch screen with 3 years warranty time whilst all PCB for interactive whiteboard come with advanced replacement warranty as standard for 3 years, which means if there is a problem and we can’t fix it you’ll get a replacement straight away.
The step to DIY touch TV:
1. Fine a 4mm normal glass for 55inch. Then cut it into the shape of our requirements, Each corner needs to cut an equilateral triangle of variable length is 68 mm.
2. In the accessories bas, you will find four fixed items to fixed the glass ,and this gelatin sponge. Put the gelatin sponge with four fixed items like the pictures.
3. Remove the total of 16 screw of four corners.
4.Put the glass on the touch frame, then put the fixed item with gelatin sponge on the glass, then install the screw like the picture.
. All four corner do like this, and the whole picture as below.
5.Install the hanging like picture. The upper two Angle like this, then put the other hanging item like the picture and install the screw. ,The effect of the installed as like the picture.
6. The lower two Angle as like the below picture and do like the step.5. The effect of the installed as like the picture.
7. All step are finished, the effect picture as blew.